LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 603 (Engine Cooling System) >> Repair Instructions >> Fan Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Do not use or attempt to repair a damaged cooling fan assembly. Replace damaged fans with new assemblies. An unbalanced cooling fan could fly apart causing personal injury and property damage.
    Fig 1: View Of Fan Clutch & Fan Blade
    GM367006Courtesy of GENERAL MOTORS CORP.
  1. Install the fan clutch to the fan blade.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the bolts to the fan clutch.

    Tighten:  Tighten the bolts to 23 N.m (17 lb ft).

    3. Fig 2: View Of Fan Assembly Removed
    GM367004Courtesy of GENERAL MOTORS CORP.
  3. Install the fan blade to the vehicle.
    4. Fig 3: Installing J 46406 To Fan Clutch
    GM1406734Courtesy of GENERAL MOTORS CORP.
  4. Install J 46406  to the fan clutch. See Special Tools and Equipment .

    Tighten:  Tighten the nut to 59 N.m (44 lb ft).

  5. Install the fan shroud. Refer to Fan Shroud Replacement .
scientia non olet · About LEMON Manuals