Installation Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Wiper Transmission Bolts & Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Align the wiper transmission to vehicle.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the bolts (1) retaining the wiper transmission to the vehicle.
Tighten: Tighten the bolts to 9 N.m (7 lb ft).
Connect the wiper motor electrical connector (2).
Install the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.
Engage wipers and check for proper operation.