LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 589 (Body Front End) >> Repair Instructions >> Hood Support Cable Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the hood.
    CAUTION: Refer to Hood Hold-Open Device Caution in Cautions and Notices.
    2. Fig 1: Hood Support Cable Pins
    GM822819Courtesy of GENERAL MOTORS CORP.
  2. Remove the pin retaining the lower section of the cable to the hood by removing the retaining clip (1).
    3. Fig 2: Hood Retaining Clip
    GM861772Courtesy of GENERAL MOTORS CORP.
  3. Remove the pin retaining the upper section of the cable to the hood by removing the retaining clip (1).
  4. Remove the cable from the vehicle.
scientia non olet · About LEMON Manuals