LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 589 (Body Front End) >> Repair Instructions >> Hood Support Cable Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Hood Support Cable Pins
    GM822819Courtesy of GENERAL MOTORS CORP.
  1. Attach the lower section of the hood support cable to the hood by inserting the pin into the cable and installing the retaining clip (1).
    2. Fig 2: Hood Retaining Clip
    GM861772Courtesy of GENERAL MOTORS CORP.
  2. Attach the upper section of the hood support cable to the vehicle by inserting the pin into the cable and installing the retaining clip (1).
  3. Close the hood.
scientia non olet · About LEMON Manuals