LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 587 (Transfer Case - BW 4484) >> Repair Instructions >> Transfer Case Motor/Encoder Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Transfer Case Encoder/Motor Assembly
    GM819575Courtesy of GENERAL MOTORS CORP.
  1. Remove the transfer case shield. Refer to Transfer Case Shield Replacement .
  2. Disconnect the encoder motor electrical connector.
  3. Remove the encoder motor bolts.
  4. Remove the encoder motor.
  5. Remove the actuator insulator.
scientia non olet · About LEMON Manuals