LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 586 (HVAC Systems - Automatic) >> Repair Instructions >> Sun Load Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Sun Load Sensor & I/P Upper Trim Pad
    GM870457Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector to the sun load sensor.
  2. Install the sun load sensor to the I/P upper trim pad by turning clockwise.
  3. Install the I/P upper trim pad. Refer to Trim Pad Replacement - Instrument Panel (I/P) Upper .
scientia non olet · About LEMON Manuals