LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 582 (Seat System) >> Repair Instructions >> Seat Switch Bezel Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the power seat adjuster switch assembly to the seat switch bezel.
  2. Install the lumbar support switch to the seat switch bezel.
  3. Connect the electrical connectors.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
    4. Fig 1: View Of Seat Switch Bezel
    GM389092Courtesy of GENERAL MOTORS CORP.
  4. Install the screws retaining the power seat switch bezel.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

scientia non olet · About LEMON Manuals