LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 582 (Seat System) >> Repair Instructions >> Head Restraint Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Head Restraint
    GM867067Courtesy of GENERAL MOTORS CORP.
  1. Install the head restraint by pushing down on restraint until the restraint is fully seated.
  2. To ensure the head restraint is fully seated pull the head restraint up to the full upward position.

    The head restraint must not come off the restraint rod.