LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 562 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Negative Cable Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
    Fig 1: View Of Negative Battery Cable At Battery
    GM832902Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure (Single Battery) .
    2. Fig 2: Forward Lamp Wiring Harness Ground/Negative Cable Bolt
    GM662101Courtesy of GENERAL MOTORS CORP.
  2. Raise and suitably support the vehicle with safety stands. Refer to Lifting and Jacking the Vehicle in General Information.
  3. Remove the engine protection shield. Refer to Engine Protection Shield Replacement in Frame and Underbody.
  4. Remove the forward lamp wiring harness ground/negative cable bolt.
  5. Remove the engine wiring harness ground/negative cable bolt.
  6. Remove the negative battery cable.
scientia non olet · About LEMON Manuals