Installation Procedure
WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Refer to FASTENER NOTICE
in Cautions and Notices.
Important: Clean any existing oxidation from the contact face of the battery terminal and battery cable using a wire brush before installing the battery cable to the battery terminal.
- Connect the battery negative cable to the battery.
Tighten
Tighten the battery negative terminal bolt to 16 N.m (12 lb ft).
- Unlock the Theftlock® radio (if applicable).
- Program the radio stations back into the radio as recorded at the beginning of the procedure.
- Set the clock to the current time. Refer to RADIO/AUDIO SYSTEM DESCRIPTION AND OPERATION in Entertainment.