LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Engine Control System - Removal & Installation) >> Ignition Systems >> Ignition Coil >> Removal

Ignition Coil: Removal

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove 4 bolts from the engine cover (1). See Figure .
  2. Remove engine cover (1).
  3. Disconnect all ignition coil (2) harness connectors. See Fig 1 .
  4. Remove mounting bolts (4) from the ignition coils. See Fig 1 .
  5. Remove the bolts (2) securing the wiring harness (1).
  6. Remove the wiring harness (1).
  7. Remove the ignition coils (3).
Fig 1: Removing/Installing Ignition Coils
G00180655Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals