LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Engine Control System - Removal & Installation) >> Fuel Systems >> Fuel Pressure Regulator >> Removal

Fuel Pressure Regulator: Removal

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fuel pressure regulator is located on fuel pump assembly in the fuel tank. Remove the fuel sender assembly. See FUEL SENDER ASSEMBLY  .
  2. Remove the bottom cap (2) and the lower cushion (3) from the fuel sender assembly. See Fig 1 .
  3. Remove the fuel pressure regulator (1).
Fig 1: Removing/Installing Fuel Pressure Regulator
G00180648Courtesy of GENERAL MOTORS CORP.