LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 433 (Body Front End) >> Repair Instructions >> Hood Link Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the hood link assembly (6) to the vehicle.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the bolt (5) holding the hood link assembly to the fender.

    Tighten:  Tighten the link assembly to the fender bolt to 25 N.m (18 lb ft).

  3. Install the fender bolt (7) holding the hood link assembly to the hood hinge.

    Tighten:  Tighten the hinge bolts to 25 N.m (18 lb ft).

    Fig 1: View Of Hood, Hinge & Bolts
    GM385497Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals