LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 433 (Body Front End) >> Repair Instructions >> Hood Latch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the hood release cable end to the latch.
    2. Fig 1: Hood Release Cable & Latch
    GM393503Courtesy of GENERAL MOTORS CORP.
  2. Connect the hood ajar indicator switch connector, if equipped.
  3. Install the hood latch (1) to the radiator support (3).
  4. Install the hood latch bolts (2) loosely.
    5. Fig 2: Hood Release Latch & Bolts
    GM331323Courtesy of GENERAL MOTORS CORP.
  5. Adjust the hood latch height so that when the hood is closed, the hood is held securely against the front hood bumpers.
    6. NOTE: Refer to Fastener Notice in Cautions and Notices.
  6. Raise the hood.

    Tighten:  Tighten the hood latch bolts to 9 N.m (80 lb in).

  7. Adjust the front hood bumpers so that the top of the hood is flush with the fenders.
  8. Install the upper radiator support baffle. Refer to Radiator Air Baffle and Deflector Replacement - Upper .
scientia non olet · About LEMON Manuals