LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 409 (Engine Controls - 4.3L (Introduction)) >> Repair Instructions >> Fuel Pressure Regulator Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra and 2004 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the upper intake manifold. Refer to Intake Manifold Replacement - Upper in Engine Mechanical-4.3L.
  2. Remove the fuel pressure regulator retaining clip (5).
  3. Twist and pull the fuel pressure regulator (6) in order to remove the regulator from the housing using a shop towel to catch any spilled fuel.
  4. Remove and discard the regulator seal O-ring (10).
  5. Remove and discard the regulator filter (9).
  6. Remove and discard the regulator seal O-ring (8).
  7. Remove and discard the regulator seal backup ring (7).
    8. Fig 1: View Of Fuel Meter Body Assembly Components
    GM821586Courtesy of GENERAL MOTORS CORP.
  8. Cover the fuel pressure regulator housing to prevent contamination from entering the fuel system.
scientia non olet · About LEMON Manuals