LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 373 (Interior Trim) >> Repair Instructions >> Assist Handle Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the assist handle (3) in the headliner.
    NOTE: Refer to COMPONENT FASTENER TIGHTENING NOTICE in Cautions and Notices.
  2. Install the fasteners (1) in order to secure the assist handle.

    Tighten 

    Tighten the fasteners to 3 N.m (27 lb in).

  3. Snap the end cap covers (2) into position.
    Fig 1: Installing Assist Handle
    G01508372Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals