LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 357 (Wiper System And Washer System) >> Repair Instructions >> Wiper Blade Element Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.

Important:  Replace the wiper blade element if it is removed from the wiper blade.

  1. Remove the wiper blade from the wiper arm. Refer to WIPER ARM BLADE REPLACEMENT  .
  2. Remove the bottom claws of the wiper blade from the notches in the wiper blade element.
  3. Pull the wiper blade element out through the wiper blade claws.
    Fig 1: Pulling Wiper Blade Element Out Through Wiper Blade Claws
    G01507042Courtesy of GENERAL MOTORS CORP.