LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 332 (Seat System) >> Repair Instructions >> Seat Switch Replacement - Power >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the power seat switch to bezel screws.

    Tighten 

    1. Tighten the screws to 2 N.m (18 lb in).
    Fig 1: Installing Power Seat Switch To Bezel Screws
    G01459191Courtesy of GENERAL MOTORS CORP.
  2. Install the power seat switch bezel to the seat. Refer to SEAT SWITCH BEZEL REPLACEMENT  .
    Fig 2: Installing Power Seat Switch Bezel To Seat
    G01459192Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals