Activating System
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 GMC C3500 HD, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Remove key from ignition. Connect passenger-side air bag module Yellow 2-pin connector and install Connector Position Assurance (CPA) clip. See Figure. Close glove box.
- Connect driver-side air bag connector, located near base of steering column. See Figure. Install CPA clip. Install driver-side knee bolster. Install AIR BAG fuse in instrument panel fuse block, located on lower left side of instrument panel. Check SIR system for proper operation. See SYSTEM OPERATION CHECK .