LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> Body & Frame >> Seats >> Repair Instructions >> Lumbar Replacement - Front Seat >> Installation Procedure

Installation Procedure

  1. Position the power lumbar/bolster assembly on the seat.
  2. Connect the electrical connectors to the motors.
  3. Fasten the lumbar wire at the bottom of the frame.
    4. Fig 1: Attaching Lumbar Clip Onto Top Of Seat Frame
    GM381500Courtesy of GENERAL MOTORS CORP.
  4. Attach the lumbar clip onto the top of the seat frame.
    5. Fig 2: Bolster Paddles
    GM385757Courtesy of GENERAL MOTORS CORP.
  5. Install the rivets to secure the bolster paddles (1).
  6. Install the seat back cover and pad. Refer to Seat Back Cover and Pad Replacement - Front .
  7. Install the head restraint and guides. Refer to Head Restraint Replacement .
  8. Install the seat in the vehicle. Refer to Seat Replacement - Front Bucket .
scientia non olet · About LEMON Manuals