LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Steering Wheel And Column >> Repair Instructions >> Intermediate Steering Shaft Replacement - Lower >> Installation Procedure

Installation Procedure

    Fig 1: Lower Intermediate Shaft
    GM389603Courtesy of GENERAL MOTORS CORP.
  1. Install the lower intermediate shaft to the vehicle.
  2. Connect the lower intermediate shaft to the power steering gear.
    3. NOTE: Refer to FASTENER NOTICE .
  3. Install the lower intermediate shaft to the power steering gear input shaft pinch bolt.

    Tighten:  Tighten the lower intermediate shaft the power steering gear input shaft pinch bolt to 47 N.m (35 lb ft).

    4. Fig 2: Upper Intermediate Shaft & Lower Intermediate Shaft
    GM793256Courtesy of GENERAL MOTORS CORP.
  4. Connect the lower intermediate shaft to the upper intermediate shaft.
  5. Install the lower intermediate shaft to the upper intermediate shaft pinch bolt.

    Tighten:  Tighten the lower intermediate shaft to the upper intermediate shaft pinch bolt to 50 N.m (37 lb ft).

    6. Fig 3: Identifying J 42640
    GM333146Courtesy of GENERAL MOTORS CORP.
  6. Unlock the steering column by removing J 42640  from the steering column lower trim cover access hole.
scientia non olet · About LEMON Manuals