LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Rear End >> Repair Instructions >> Strut Replacement - Liftgate >> Installation Procedure

Installation Procedure

    Fig 1: Installing Upper & Lower Ends Of Liftgate Strut
    GM831422Courtesy of GENERAL MOTORS CORP.
  1. Install the liftgate strut to the vehicle ball studs.
  2. Push on the end of the strut in order to install the upper end of the liftgate strut (2) to the ball stud of the liftgate.
  3. Push on the end of the strut in order to install the lower the end of the liftgate strut (1) to the ball stud on the body.
  4. Close the liftgate.
scientia non olet · About LEMON Manuals