LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Rear End >> Repair Instructions >> Liftgate Applique Replacement >> Installation Procedure

Installation Procedure

  1. Align the liftgate applique to the liftgate.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
    Fig 1: Liftgate Applique
    GM880552Courtesy of GENERAL MOTORS CORP.
  2. Install the outer applique fasteners (1).
  3. Install the inner applique fasteners (2).

    Tighten:  Tighten the fasteners to 3 N.m (27 lb in).

  4. Install the high mounted stop lamp. Refer to High Mounted Stop Lamp Replacement (SUV) in Lighting Systems.
  5. Close the liftgate.
scientia non olet · About LEMON Manuals