LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wipers/Washer Systems >> Repair Instructions >> Washer Pump Replacement >> Installation Procedure

Installation Procedure

  1. Install a new washer pump grommet into the container.
  2. Lubricate the washer pump pickup with clean washer solvent.
    3. Fig 1: Identifying Washer Pump
    GM869089Courtesy of GENERAL MOTORS CORP.
  3. Install the washer pump in the washer solvent container - gentle pressure is required.
    4. Fig 2: Washer Solvent Level Sensor Electrical Connector
    GM1453811Courtesy of GENERAL MOTORS CORP.
  4. Install the washer solvent container. Refer to Washer Solvent Container Replacement .
scientia non olet · About LEMON Manuals