LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting Systems >> Repair Instructions >> License Lamp Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Locating License Lamp Bulb
    GM813577Courtesy of GENERAL MOTORS CORP.
  1. Install the bulb to the socket.
  2. Install the bulb socket to the lamp.
  3. Install the lamp to the vehicle.
    4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the screws to the lamp.

    Tighten:  Tighten the screws to 3 N.m (26 lb in).

  5. Connect the electrical connector.
  6. Install the bezel and lamp to the license plate pocket.
  7. Install the screws to the license pocket bezel.

    Tighten:  Tighten the screws to 3 N.m (26 lb in).

scientia non olet · About LEMON Manuals