LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2023 >> Pilot Touring, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Mechanical / Engine Control System - Service, Testing And Troubleshooting >> General Information >> How to Set Readiness Codes >> Evaporative Emission (EVAP) Control System Monitor and Readiness Code

Evaporative Emission (EVAP) Control System Monitor and Readiness Code

NOTE:  All readiness codes are cleared when the 12 volt battery is disconnected, if DTCs have been cleared, or if the PCM is reset with the HDS.

Enable Criteria and Procedure 

Refer to the advanced diagnostic information for DTC P0455 , P0456 , P04DF , P2421 and P2422 , and do the confirmation procedures described in the advanced diagnostic information.

scientia non olet · About LEMON Manuals