LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2022 >> Odyssey Elite >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System / Engine Mechanical - Service, Testing And Troubleshooting >> General Information >> How to Set Readiness Codes >> Evaporative Emission (EVAP) Control System Monitor and Readiness Code

Evaporative Emission (EVAP) Control System Monitor and Readiness Code

NOTE:  All readiness codes are cleared when the 12 volt battery is disconnected, if DTCs have been cleared, or if the PCM is reset with the HDS.

Enable Criteria and Procedure 

Refer to the advanced diagnostic information for DTC P0441 and P0456 , and do the confirmation procedures described in the advanced diagnostic informations.

scientia non olet · About LEMON Manuals