DTC P061B
DTC P061B : Internal Control Module Torque Calculation Performance
- Before you troubleshoot, review the General Troubleshooting Information .
- This code is caused by an electrical circuit problem and cannot be caused by a mechanical problem in the transmission.
| DTC Description | Confirmed DTC | Pending DTC | Freeze Frame |
|---|---|---|---|
| P061B Internal Control Module Torque Calculation Performance |
DTC (A/T)
- Problem verification
- 1. Turn the vehicle to the ON mode.
- 2. Clear the DTC with the HDS.
- 3. Raise the vehicle on a lift. Make sure it is securely supported, and allow all four wheels to rotate freely.
- 4. Start the engine.
- 5. Run the vehicle with the shift lever in D, under the same conditions as those indicated by freeze data.
- 6. Check for Pending or Confirmed DTCs with the HDS.
DTC Description Confirmed DTC Pending DTC Freeze Frame P061B Internal Control Module Torque Calculation Performance Is DTC P061B indicated?
YES
The failure is duplicated. Check for any authorized service information related to the DTCs or symptoms you are troubleshooting or substitute a known-good TCM .
NO
Intermittent failure, the system is OK at this time. Check for poor connections and loose terminals at the TCM. If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the freeze data/on-board snapshot.