DTC P0602
DTC P0602 : Boot Mode(Programming Error)
NOTE:
- Before you troubleshoot, review the General Troubleshooting Information .
- This code is caused by an electrical circuit problem and cannot be caused by a mechanical problem in the transmission.
- This DTC is indicated when the TCM update procedure is not completed.
- Do not turn the vehicle to the other than ON mode while updating the TCM. If you do, the TCM can be damaged.
| DTC Description | Confirmed DTC | Pending DTC | Freeze Frame |
|---|---|---|---|
| P0602 Boot Mode(Programming Error) |
DTC (A/T)
- TCM check (update)
- 1. Turn the vehicle to the ON mode.
- 2. Clear the DTC with the HDS.
- 3. Update the TCM.
- 4. Turn the vehicle to the OFF (LOCK) mode.
- 5. Turn the vehicle to the ON mode.
- 6. Check for Pending or Confirmed DTCs with the HDS.
DTC Description Confirmed DTC Pending DTC Freeze Frame P0602 Boot Mode(Programming Error) Is DTC P0602 indicated?
YES
NO
Update is complete.