DTC: 2702
DTC 2702 : GPS Diag: Receiver in Navi ECU
NOTE:
- Check the vehicle 12 volt battery condition first - Refer to:
- This audio DTC sets when a problem is detected in the internal GPS receiver.
- Before You Troubleshoot, Make Sure To Follow The General Troubleshooting Information .
- Problem verification
-1. Clear the hard error codes.
- 2. Turn the vehicle to the OFF (LOCK) mode then the ON mode.
- 3. Check for hard error codes.
Is DTC 2702 indicated?
YES
Replace the audio unit - Refer to:
Audio Unit Removal and Installation (Display Audio Type [8-inch Screen]) (2016 2017 2018) or
Audio Unit Removal and Installation (Color Audio Type [5-inch Screen]) .
NO
Intermittent failure, the system is OK at this time.
DTC 2702 : GPS Diag: Receiver in Navi ECU
NOTE:
- Check the vehicle 12 volt battery condition first - Refer to:
- This navigation DTC sets when a problem is detected in the internal GPS receiver.
- Before You Troubleshoot, Make Sure To Follow The General Troubleshooting Information .
- Check any official Honda service website for more service information about the navigation system.
- Problem verification
-1. Clear the hard error codes.
- 2. Turn the vehicle to the OFF (LOCK) mode then the ON mode.
- 3. Check for hard error codes.
Is DTC 2702 indicated?
YES
Replace The AUDIO-NAVIGATION Unit (2016 2017 2018) .
NO
Intermittent failure, the system is OK at this time.