LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2021 >> Passport Elite >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System - Service Information >> Overhaul >> Alternator Overhaul >> Reassembly >> Procedure

Alternator Overhaul: Reassembly: Procedure

GHH368112Courtesy of HONDA, U.S.A., INC.
Detailed information, notes, and precautions
Torque: N.m (kgf.m, lbf.ft)
Replace
*1 These parts have inspection items.
  1. Front Bearing - Install
    GHH368113Courtesy of HONDA, U.S.A., INC.
    		 1. Use a hand press to install a new front bearing (A) in the drive-end housing, with the driver handle, 15 x 135L (B), and the bearing driver attachment, 42 x 47 mm (C).
  2. Front Bearing Retainer - Install
  3. Rotor - Install
  4. Rear Housing Assembly - Install
  5. Brush Holder - Install
    GHH368114Courtesy of HONDA, U.S.A., INC.
    		 1. Push the brushes (A) in, then insert a pin or drill bit (B) (about 1.6 mm (1/16 in) diameter) to hold them there.
    GHH368115Courtesy of HONDA, U.S.A., INC.
    		 2. Install the brush holder.
    GHH368116Courtesy of HONDA, U.S.A., INC.
    		 3. Pull out the pin or drill bit.
  6. End Cover and Terminal Insulator - Install
  7. OAD Pulley - Install 
scientia non olet · About LEMON Manuals