DTC C0044-49

ElectronicCircuitSchematics-buttonADInfo-button DTC Advanced Diagnostics: VSA related DTCs SystemDescription-button OverviewDTC C0044-49  : Master Cylinder Pressure Sensor Failure (Internal Circuit Failure)

DTCs (VSA)

1. Problem verification

   -1. Turn the vehicle to the ON mode.

   -2. Clear the DTC with the HDS.

   -3. Turn the vehicle to the OFF (LOCK) mode, then start the engine.

   -4. Test-drive the vehicle.

   NOTE: Drive the vehicle on the road, not on a lift.

   -5. Check for DTCs with the HDS.

   DTC Description	DTC
   C0044-49 Master Cylinder Pressure Sensor Failure (Internal Circuit Failure)

   Is DTC C0044-49 indicated?

   YES 

   Check for loose terminals and poor connections in the VSA modulator-control unit 38P connector. If they are OK, replace the VSA modulator-control unit .

   NO 

   Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting .