DTC C0072-00

DTC C0072-00 : Brake Pad Temperature too High

NOTE

Initial Diagnosis:
The initial on-board diagnosis occurs right after the vehicle condition is turned to the ON mode, and the ABS, VSA, and brake system indicator (amber) come on, and continues until the indicator goes off.
Regular Diagnosis:
The regular on-board diagnosis begins right after the ABS, VSA, and brake system indicator (amber) go off, and it continues until the vehicle condition is turned to the OFF (LOCK) mode.
Review "How to Troubleshoot the VSA System" before doing the DTC troubleshooting procedure.
Test-drive the vehicle according to local traffic conditions and regulations. Do not test-drive on a lift unless specified.
The possible causes shown may not be a complete list of all potential problems, and it is possible that there may be other causes.

Confirmation Procedure	Basic Condition: Turn the vehicle to the ON mode.
Execution	Initial Diagnosis/Regular Diagnosis
Duration	After setting temperature detection (immediate)
DTC Type	1 drive cycle Brake system indicator (amber) on (Dependant upon the conditions)
Fail Safe Action	Stop ACC function*
Possible Cause	Temporary brake pad high temperature condition

*: With ACC