Resetting the Power Window Control Unit: Procedure: Notes

Reset the power window control unit after doing any of the following actions:

• Power window regulator replacement, removal, or installation.
• Glass run channel replacement, removal, or installation.
• Door glass replacement, removal, or installation.
• Power window master switch replacement.
• Front passenger's power window switch replacement.
• Rear power window switch replacement*.
• Power is disconnected from the power window master switch and front passenger's power window switch, left rear power window switch*, or right rear power window switch* while the power window timer is ON.

NOTE: 

• Steps 3-9 shows the procedure of clearing of the power window control unit, and steps 10-13 shows the procedure of learning. When clearing, use the target power window switch on the power window master switch. When learning, power windows can not be operated from the power window master switch, so use the power window switch of each seat.
• If the front passenger's power window, left rear power window switch*, or right rear power window switch* has lost power when the vehicle off timer is ON, it cannot be operated from the driver's switch and must be reset from the front passenger's power window switch, left rear power window switch*, or right rear power window switch*.

  *: With all power windows AUTO UP/DOWN function