No-Load Charging Procedure

The expected life span of the high voltage battery can be affected if the vehicle is not used for a long time. To reduce this risk, perform the charging procedure within at least 12 months.

• Apply the parking brake, and block the front wheels.
• Firmly press the brake pedal, and turn the vehicle to the READY TO DRIVE mode.
• Make sure the transmission is in N or P position/mode.
• Press the accelerator pedal to the floor for 10 seconds while pressing the brake pedal. After 10 seconds, the vehicle starts the engine and holds the engine speed at 1, 200 rpm automatically for high voltage battery charging.

  NOTE: 

• • Do not release the accelerator pedal and brake pedal during high voltage battery charging.
  • After the high voltage battery charging is completed, the engine stops automatically.
• After engine stops, turn the vehicle to the OFF (LOCK) mode.