DTC U3000-51
DTC U3000-51 : Multipurpose Camera Unit Update Incomplete
NOTE:
- Before you troubleshoot, review the general troubleshooting information .
- This DTC is indicated when the multipurpose camera unit update is not completed properly.
| DTC Description | DTC |
|---|---|
| U3000-51 Multipurpose Camera Unit Update Incomplete |
DTC (IDAS)
- Multipurpose camera unit check (update)
-1. Update the multipurpose camera unit .
-2. Turn the vehicle to the OFF (LOCK) mode.
-3. Turn the vehicle to the ON mode, then wait for at least 5 seconds.
-4. Check for DTCs with the HDS.
DTC Description DTC U3000-51 Multipurpose Camera Unit Update Incomplete Is DTC U3000-51 indicated?
YES
Check for loose terminals in the multipurpose camera unit 20P connector. If the multipurpose camera unit was updated and the symptom/indication is still present, replace the multipurpose camera unit .
NO
Troubleshooting is complete. If any other DTCs are indicated, go to the indicated DTC's troubleshooting.