VSA Sensor Neutral Position Memorization: Procedure

NOTE: 

• The VSA sensor neutral position must be learned whenever you do any of these actions:
• • -

    Update or replace the VSA modulator-control unit.

  • -

    Update or replace the SRS unit.

  • -

    Remove the steering wheel.

  • -

    Disconnect the steering joint.

  • -

    Wheel alignment adjustment.

• Before doing the memorization procedure, park the vehicle on a flat and level surface.
• After doing the VSA sensor neutral position memorization, do the related procedure(s).

1. HDS DLC - Connect
2. VSA Sensor Neutral Position - Memorize

   NOTE:  Do not press the brake pedal during this procedure. 1. Park the vehicle on a flat and level surface, with the steering wheel in the straight ahead position. 2. Select the ADJUSTMENT from the ABS/TCS/VSA menu with the HDS, then select ALL SENSOR, and follow the screen prompts.