DTC B1052

DTC B1052  : Relay Control Module (Power Distribution Module) Internal (EEPROM) Error

NOTE:  If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A .

DTC (Power Distribution Module)

1. Problem verification

   -1. Clear the DTCs with the HDS.

   -2. Turn the vehicle to the OFF (LOCK) mode and then the ON mode.

   -3. Check for DTCs with the HDS.

   DTC Description	DTC
   B1052 Relay Control Module (Power Distribution Module) Internal (EEPROM) Error

   Is DTC B1052 indicated?

   YES 

   Replace the power distribution module .

   NO 

   Intermittent failure, the system is OK at this time. Check for loose or poor connections.