| Continuously variable transmission fluid |
Capacity |
Fluid change |
3.4 L (3.6 US qt) |
--- |
| Overhaul (oil pan, lower valve body, and/or transmission fluid pump removal, installation, and/or replacement) |
4.2 L (4.4 US qt)* |
*Standard amount |
| Overhaul |
5.7 L (6.0 US qt) |
--- |
Use Honda HCF-2.
NOTE:
Using the wrong type of fluid will damage the transmission. |
| Hydraulic pressure |
Forward clutch pressure |
At idle in D |
390-880 kPa (3.98-8.97 kgf/cm2, 56.6-127.6 psi) |
--- |
| Reverse brake pressure |
At idle in R |
390-880 kPa (3.98-8.97 kgf/cm2, 56.6-127.6 psi) |
--- |
| Drive pulley pressure |
At idle in N |
590-1, 140 kPa (6.02-11.62 kgf/cm2, 85.6-165.3 psi) |
--- |
| Driven pulley pressure |
At idle in N |
850-1, 400 kPa (8.67-14.28 kgf/cm2, 123.3-203.1 psi) |
--- |
| Stall speed |
Check with vehicle on level ground |
|
2, 250 rpm |
2, 000-2, 400 rpm |
| Forward clutch |
Clearance between clutch end-plate and top disc |
|
1.0-1.2 mm (0.039-0.047 in) |
--- |
| Reverse brake |
Clearance between clutch end-plate and top disc |
|
1.0-1.2 mm (0.039-0.047 in) |
--- |
| Input shaft |
Thrust clearance |
|
0.52-0.80 mm (0.0205-0.0315 in) |
Adjust |
| Sun gear |
Thrust clearance |
|
0.04-0.09 mm (0.0016-0.0035 in) |
Adjust |