HandsFreeLink System Self-Diagnostic Function
NOTE:
- Check the vehicle 12 volt battery condition first .
- The self-diagnostic function can only be initiated while the HFL is in its idle state.
1. Turn the vehicle to the ACCESSORY mode
2. Press and hold the HANG-UP/BACK button (A) for more than 5 seconds.
3. When the HFL system enters the self-diagnostic function, the following will occurs:
- If the HFL system is OK, the front speaker outputs "The HFT is OK."
- If the HFL system has any problem, the front speaker outputs "The HFT is NG." Go to HFL does not respond troubleshooting - Refer to: HandsFreeLink System Symptom Troubleshooting - HFL does not respond(With Normal Audio), or HandsFreeLink System Symptom Troubleshooting - HFL does not respond(With Navigation), or HandsFreeLink System Symptom Troubleshooting - HFL does not respond(With Display Audio (7-inch Screen), Without Navigation), or HandsFreeLink System Symptom Troubleshooting - HFL does not respond(With Color Audio (5-inch Screen)) .