DTC U3000-49 (Multipurpose Camera Unit)

DTC U3000-49  : Multipurpose Camera Unit Internal Electronic Failure

NOTE: Before you troubleshoot, review the general troubleshooting information .

DTC (IDAS)

1. Problem verification

   -1. Turn the vehicle to the ON mode.

   -2. Clear the DTC with the HDS.

   -3. Turn the vehicle to the OFF (LOCK) mode.

   -4. Turn the vehicle to the ON mode, then wait for at least 5 seconds.

   -5. Check for DTCs with the HDS.

   DTC Description	DTC
   U3000-49 Multipurpose Camera Unit Internal Electronic Failure

   Is DTC U3000-49 indicated?

   YES 

   Check for loose terminals and poor connections in the multipurpose camera unit 20P connector. If they are OK, replace the multipurpose camera unit .

   NO 

   Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting .