DTC P07E4, P07E6
DTC P07E4 : Unable to Engage Park DTC P07E6 : Stuck in Park
- Before you troubleshoot, review the General Troubleshooting Information .
- DTC P07E4 can be caused if the parking lock is released by using the tool and the vehicle is turned to the ON mode.
| DTC Description | Confirmed DTC | Pending DTC | Freeze Frame |
|---|---|---|---|
| P07E4 Unable to Engage Park | |||
| P07E6 Stuck in Park |
DTC (A/T)
- Problem verification
- 1. Turn the vehicle to the ON mode.
- 2. Clear the DTC with the HDS.
- 3. Start the engine.
- 4. While pressing the brake pedal, shift the transmission to R position/mode, N position/mode, D position/mode, and then shift to P position/mode for at least 1 second.
- 5. Check for Pending or Confirmed DTCs with the HDS.
DTC Description Confirmed DTC Pending DTC Freeze Frame P07E4 Unable to Engage Park P07E6 Stuck in Park Is DTC P07E4 or P07E6 indicated?
YES
The failure is duplicated. Replace the transmission - Refer to: Automatic Transmission Removal and Installation(9-Speed A/T), or Automatic Transmission Removal and Installation(6-Speed A/T) .
NO
Intermittent failure, the system is OK at this time. If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the freeze data/on-board snapshot.