LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2017 >> Odyssey LX >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Brake System - Service, Testing And Troubleshooting) >> Repair Procedures, Tests >> Brake System Inspection and Test >> Inspection

Brake System Inspection and Test: Inspection

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2025 Honda Odyssey, 2024 Honda Odyssey, 2023 Honda Odyssey, 2022 Honda Odyssey, and 2021 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
  1. Brake System - Inspect

    Inspect the brake system components listed. Repair or replace any parts that are leaking or damaged.

    Component Inspections: 

    Component Procedure Also check for
    Master cylinder Look for damage or signs of fluid leakage at:
    • Reservoir or reservoir grommets.
    • Lines and their joints.
    • Between master cylinder and brake booster.
    Bulging seal at reservoir cap. This is a sign of fluid contamination.
    Brake hoses Look for damage or signs of fluid leakage at:
    • Line joints and banjo bolt connections.
    • Hoses and lines, also inspect for twisting or damage.
    Bulging, twisted, or bent lines.
    Caliper Look for damage or signs of fluid leakage at:
    • Piston seal.
    • Banjo bolt connections.
    • Bleed screw.
    Seized or sticking caliper pins.
    VSA modulator-control unit Look for damage or signs of fluid leakage at:
    • Line joints.
    • Modulator-control unit.