Front Door Weatherstrip Replacement

NOTE:

Put on gloves to protect your hands.
Take care not to scratch the door.
Take care not to damage the front upper corner hook and the rear upper corner clip (black) because they are not available separately.
Use a clip remover to detach the clips.

Remove the door weatherstrip (A).
1. Remove the door checker mounting bolt (B) at the A-pillar.
2. Detach the clips (C, D).
3. Release the rib (E), and detach the clip (F).
4. Release the weatherstrip from the holder (G) on the door sash.
  
  Fig 1: Door Weatherstrip, Door Checker Mounting Bolts, Rib, Clips And Holder With Torque Specifications
  Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the weatherstrip in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips into place securely.
- Make sure the door weatherstrip is installed in the holder securely.
- Apply medium strength liquid thread lock to the door checker mounting bolt before installation.
- Check for water leaks (see step 8 ).