DTC P287C
DTC P287C : Transmission Adaptive Values Not Learned
- Before you troubleshoot, review the General Troubleshooting Information .
- This code is caused by an electrical circuit problem and cannot be caused by a mechanical problem in the transmission.
| DTC Description | Confirmed DTC | Pending DTC | Freeze Frame |
|---|---|---|---|
| P287C Transmission Adaptive Values Not Learned |
DTC (A/T)
- Problem verification
- 1. Do the hydraulic pressure characteristic calibration procedure.
- 2. Turn the vehicle to the ON mode.
- 3. Clear the DTC with the HDS.
- 4. Turn the vehicle to the OFF (LOCK) mode.
- 5. Turn the vehicle to the ON mode.
- 6. Check for Pending or Confirmed DTCs with the HDS.
DTC Description Confirmed DTC Pending DTC Freeze Frame P287C Transmission Adaptive Values Not Learned Is DTC P287C indicated?
YES
Check for any authorized service information related to the DTCs or symptoms you are troubleshooting or substitute a known-good TCM .
NO
Intermittent failure, the system is OK at this time. Check for poor connections and loose terminals at the TCM. If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the freeze data/on-board snapshot.