HANDSFREELINK System Self-Diagnostic Function
NOTE:
- Check the vehicle 12 volt battery condition first - Refer to:
- The self-diagnostic function can only be initiated while the HFL is in its idle state.
1. Turn the vehicle to the ACCESSORY mode.
2. Press and hold the HANG-UP/BACK button (A) for more than 5 seconds.
3. When the HFL system enters the self-diagnostic function, the following will occurs:
- If the HFL system is OK, the front speaker outputs "The HFT is OK."
- If the Bluetooth module power is not supplied, the front speaker outputs "The HFT is NG". Replace the audio unit - Refer to:
Audio Unit [Display Audio Type (8-inch Screen)] (2016 2017 2018) - Removal and Installation
or audio-navigation unit - Refer to:
Audio-Navigation Unit (2016 2017 2018) - Removal and Installation
- If the HFL system does not respond, go to HFL does not respond troubleshooting - Refer to: