Using the HDS (Preferred method)

Connect the HDS to the Data Link Connector (DLC).

NOTE: There are two ways to read B-CAN code with the HDS.

First method: If multiple DTCs are stored, be sure to follow the instructions in the B-CAN system diagnosis. Test Mode A (see TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A ).
Second method: If no DTCs are retrieved, use the B-CAN System Diagnostic Test Mode 2 (see TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE 1 AND TEST MODE 2 (WITHOUT THE HDS) ) to check all inputs related to the failure.