LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2016 >> CR-Z EX, Standard Trans >> Repair and Diagnosis >> General Information >> Identification >> General Information >> Lift and Support Points >> Vehicle Lift

Vehicle Lift

  1. Position the lift blocks (A), under the vehicle's front support points (B) and rear support points (C).
    NOTE:
    • This vehicle has low ground clearance. To avoid damaging the vehicle, make sure there is enough clearance around the support points.
    • Be sure the lift blocks are properly placed to avoid damaging the vehicle.
      Fig 1: Positioning Lift Blocks Under Vehicle's Front Support Points And Rear Support Points
      G06949182Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Raise the lift a few inches, and rock the vehicle gently to be sure it is firmly supported.
  3. Raise the lift to its full height, and inspect the vehicle support points for solid contact with the lift blocks.