LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2016 >> Accord LX-S, Standard Trans >> Repair and Diagnosis >> General Information >> Reset Procedures >> BARTEC TPMS Reset Procedure >> BARTEC TPMS Reset Procedure

BARTEC TPMS Reset Procedure

Models With Information Display

  1. Inflate tires to correct pressure.
  2. Apply parking brake.
  3. Turn Ignition ON.
  4. Press and hold the TPMS button. The MIL will flash.
  5. Release parking brake.
  6. Drive vehicle.
NOTE: If the MIL does not blink a few the relearn procedure did not take. Repeat procedure.
NOTE: The relearn process requires about 30 minutes of cumulative driving at speeds between 30-60 mph.

Model With Multi-Information Display

  1. Inflate tires to correct pressure.
  2. Apply parking brake.
  3. Turn ignition ON.
  4. Press and hold DISPLAY button.
  5. Press the UP/DOWN arrow button to select VEHICLE SETTINGS, then press SEL/RESET button.
  6. TPMS Calibration appears on display.
  7. Press SEL/RESET button.
  8. The display switches to the customization setup screen, where you can select CANCEL or CALIBRATE.
  9. Press the UP/DOWN button, select CALIBRATE then press SEL/RESET button. The screen displays CALIBRATION STARTED.
  10. Release parking brake.
  11. Drive vehicle to complete procedure.
NOTE: The calibration process requires about 30 minutes of cumulative driving at speeds between 30-60 mph.
NOTE: Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
scientia non olet · About LEMON Manuals