Audio-Navigation Unit Connector C (14P)

Fig 1: Identifying Audio-Navigation Unit Connector C (14P) Terminals

Courtesy of AMERICAN HONDA MOTOR CO., INC.

AUDIO-NAVIGATION UNIT CONNECTOR C

Cavity	Wire Color	Terminal Name	Description
C1	RED	+ B	Power source for XM receiver
C2	RED	SYS ACC	Outputs signal for XM receiver switching ON/OFF
C3	GRY(1)	GA-NET BUS SH	Shield for terminals No. 11 and No. 12
C4	GRY(1)	AUDIO SH	Shield for terminals No. 1, No. 2, No. 7, and No. 8
C5	WHT	AUDIO R+	Inputs sound signal from GA-Net related unit(s)
C6	RED	AUDIO L+	Inputs sound signal from GA-Net related unit(s)
C9	BLK	GA-NET BUS+	GA-Net bus communication signal
C10	WHT	GA-NET BUS-	GA-Net bus communication signal
C11	GRY	GND	Ground for XM receiver
C13	BLK	AUDIO R-	Inputs sound signal from GA-Net related unit(s)
C14	GRN	AUDIO L-	Inputs sound signal from GA-Net related unit(s)
(1) The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire listed on the schematic.